{"id":146,"date":"2026-09-15T02:08:39","date_gmt":"2026-09-15T02:08:39","guid":{"rendered":"https:\/\/largesprocket.top\/product\/european-standard-stainless-steel-sprocket-din-8187-ss-chain-drive\/"},"modified":"2026-09-15T02:08:39","modified_gmt":"2026-09-15T02:08:39","slug":"european-standard-stainless-steel-sprocket-din-8187-ss-chain-drive","status":"publish","type":"product","link":"https:\/\/largesprocket.top\/pl\/produkt\/european-standard-stainless-steel-sprocket-din-8187-ss-chain-drive\/","title":{"rendered":"Z\u0119batka ze stali nierdzewnej zgodna z norm\u0105 europejsk\u0105 | Nap\u0119d \u0142a\u0144cuchowy DIN 8187 SS"},"content":{"rendered":"
\n

<\/p>\n

\n

Hangzhou Ever-Power Sprocket Co., Ltd.<\/p>\n

If a European machine runs DIN 8187 chain and you install an ANSI sprocket \u2014 it will fit on the shaft but the chain will not run correctly. Understanding this distinction is what this page is built around.<\/p>\n<\/div>\n

<\/p>\n

The Specification Error That Looks Right Until the Machine Runs<\/h2>\n

A purchasing manager ordering a replacement #40-equivalent stainless steel sprocket for a European-manufactured food conveyor might reasonably specify “12.7 mm pitch stainless sprocket” \u2014 and receive an ANSI 40 unit that fits the shaft bore, looks dimensionally correct sitting on the desk, and mounts without obstruction. The problem appears within the first operating hour: the smaller 8.51 mm roller of the DIN 8187 (08B) chain does not seat correctly in the 7.92 mm-roller-profile tooth form of the ANSI 40 sprocket. The chain rides high on the tooth tips, generates noise, and wears at a rate several times higher than normal. Within weeks, both sprocket and chain may require replacement. The Z\u0119batka Ever-Power ze stali nierdzewnej o standardzie europejskim<\/strong> is machined specifically to DIN 8187 \/ ISO 606 tooth geometry \u2014 verified against DIN 8187 chain gauge sets, not just drawings \u2014 ensuring correct seating and full-life performance on European-standard chain drives.<\/p>\n

\"European<\/p>\n

<\/p>\n

DIN 8187 vs. ANSI B29.1 \u2014 The Dimensional Differences That Matter<\/h2>\n

Both standards use the same pitch values but differ in roller diameter and inner width \u2014 the two dimensions that directly determine tooth form geometry. At every common pitch, the DIN roller is larger than the ANSI roller, requiring a different seating radius in the sprocket tooth pocket. This is why ANSI and DIN sprockets are not interchangeable even when pitch matches.<\/p>\n

\n\n\n\n\n\n\n\n\n\n
BS\/DIN Chain<\/th>\nSkok (mm)<\/th>\nDIN Roller Dia.<\/th>\nANSI Equiv.<\/th>\nANSI Roller Dia.<\/th>\n<\/tr>\n<\/thead>\n
06B<\/td>\n9.525<\/td>\n6.35 mm<\/td>\nANSI 35<\/td>\n5.08 mm \u274c<\/td>\n<\/tr>\n
08B<\/td>\n12.7<\/td>\n8.51 mm<\/td>\nANSI 40<\/td>\n7.92 mm \u274c<\/td>\n<\/tr>\n
10B<\/td>\n15.875<\/td>\n10,16 mm<\/td>\nANSI 50<\/td>\n10.16 mm \u2713<\/td>\n<\/tr>\n
12B<\/td>\n19.05<\/td>\n12.07 mm<\/td>\nANSI 60<\/td>\n11.91 mm \u2248<\/td>\n<\/tr>\n
16B<\/td>\n25.4<\/td>\n15,88 mm<\/td>\nANSI 80<\/td>\n15.88 mm \u2713<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

\u274c = Non-interchangeable; tooth profile geometry differs significantly. \u2713 = Roller diameter coincidentally matches; inner width still differs \u2014 verify before assuming interchangeability.<\/p>\n

<\/p>\n

Dane techniczne<\/h2>\n
\n\n\n\n\n\n\n\n\n\n\n
Parametr<\/th>\nWarto\u015b\u0107<\/th>\n<\/tr>\n<\/thead>\n
Standard<\/td>\nDIN 8187 \/ ISO 606 \/ BS<\/td>\n<\/tr>\n
Zakres wysoko\u015bci d\u017awi\u0119ku<\/td>\n9.525 mm \u2013 31.75 mm (06B \u2013 20B)<\/td>\n<\/tr>\n
Tworzywo<\/td>\n304 SS \/ 316 SS<\/td>\n<\/tr>\n
Tooth Verification<\/td>\nDIN 8187 chain gauge sets (not just drawings)<\/td>\n<\/tr>\n
Bore Options<\/td>\nMetric finished bore (H7) + DIN 6885 keyway<\/td>\n<\/tr>\n
Zgodno\u015b\u0107<\/td>\nDIN 8187 \/ ISO 606, ISO 9001:2015, EN 10204 3.1<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

<\/p>\n

What European OEMs and Procurement Teams Require \u2014 and What We Deliver<\/h2>\n
\n
\n
\ud83d\udccb<\/div>\n
EN 10204 3.1 Material Certs<\/div>\n
Grade-confirmed mill test reports per European standard \u2014 not just generic certs.<\/div>\n<\/p><\/div>\n
\n
\ud83d\udd2c<\/div>\n
DIN 8187 Gauge Verification<\/div>\n
Tooth form verified with certified DIN gauge sets on every batch.<\/div>\n<\/p><\/div>\n
\n
\ud83d\udcd0<\/div>\n
Metric Bore + DIN Keys<\/div>\n
Finished metric bores with DIN 6885 parallel keys \u2014 not inch bores with imperial keys.<\/div>\n<\/p><\/div>\n
\n
\ud83c\udf0d<\/div>\n
DDP EU\/UK Shipping<\/div>\n
Delivered Duty Paid options to Netherlands, Germany, UK, Scandinavia \u2014 no customs hassle.<\/div>\n<\/p><\/div>\n<\/div>\n

\"Ever-Power<\/p>\n

<\/p>\n

Komponenty towarzysz\u0105ce zgodne ze standardem DIN<\/h2>\n

\"DIN<\/p>\n

Building a complete DIN-standard z\u0119batka ze stali nierdzewnej<\/a> drive requires European-standard chain \u2014 not ANSI chain \u2014 and matching hardware:<\/p>\n