Warranty: 1 years
Applicable Industries: Producing Plant, Retail, Power & Mining
Custom-made assistance: OEM, ODM, OBM
Material: Steel
Normal: ISO
Chain sort: sprocket
Packaging Information: Plastic bag+plywood circumstance, or according to your demands.
Port: ZheJiang or HangZhou or any port in China
Specification
| DIN/ISO Chain NO. |
Pitch | Roller diameter |
Width |
Pin diameter |
Pin duration |
Interior |
Plate |
Final |
| p | d1 max |
b1 min |
d2 max |
L/Lc max |
h2 max |
t/T max |
Q min |
|
| mm | mm | mm | mm | mm | mm | mm | mm | |
| 04B-1 | 6.000 | 4.00 | 2.eighty | 1.eighty five | 6.eighty/ 7.8 | 5.00 | .60 | 3./682 |
| 05B-1 | 8.000 | 5.00 | 3.00 | 2.31 | 8.twenty/ 8.nine | 7.10 | .80 | 5./1136 |
| *06B-one | 9.525 | 6.35 | 5.72 | 3.28 | 13.15/ 14.1 | 8.twenty | 1.30 | 9./2045 |
| 08B-one | twelve.seven-hundred | 8.51 | 7.75 | 4.forty five | sixteen.70/ 18.two | eleven.80 | 1.sixty | eighteen./4091 |
| 10B-1 | fifteen.875 | ten.sixteen | 9.sixty five | 5.08 | 19.fifty/ 20.nine | fourteen.70 | 1.70 | 22.4/5091 |
| 12B-one | 19.050 | twelve.07 | eleven.68 | 5.72 | 22.50/ 24.2 | 16.00 | 1.eighty five | 29./6591 |
| 16B-one | twenty five.four hundred | fifteen.88 | seventeen.02 | 8.28 | 36.ten/ 37.4 | 21.00 | 4.15/3.1 | sixty./13636 |
| 20B-1 | 31.750 | 19.05 | 19.fifty six | 10.19 | 41.thirty/ forty five, | 26.40 | 4.5/3.five | ninety five./21591 |
| 24B-one | 38.a hundred | 25.40 | twenty five.40 | 14.sixty three | fifty three.40/ 57.8 | 33.twenty | 6./4.eight | one hundred sixty./36364 |
| 28B-one | 44.450 | 27.ninety four | thirty.99 | 15.90 | sixty five.ten/ 69.5 | 36.70 | 7.5/6. | 200./45455 |
| 32B-one | 50.800 | 29.21 | thirty.ninety nine | seventeen.eighty one | sixty six.00/ seventy one. | forty two.00 | 7./6. | 250./56818 |
| 40B-one | sixty three.500 | 39.37 | 38.ten | 22.89 | 82.twenty/ 89.2 | 52.96 | 8.5/8. | 355./80682 |
| 48B-one | 76.200 | 48.26 | 45.72 | 29.24 | ninety nine.10/ 107. | sixty three.80 | 12./ten. | 560./127272 |
| 56B-1 | 88.900 | fifty three.98 | 53.34 | 34.32 | 114.6/ 123. | seventy seven.eighty | 13.5/twelve. | 850./193180 |
| 64B-1 | one hundred and one.60 | 63.fifty | sixty.96 | 39.forty | one hundred thirty./ 138.5 | ninety.17 | fifteen./thirteen. | 112./254544 |
| 72B-1 | 114.30 | 72.39 | sixty eight.58 | forty four.forty eight | 147.4/ 156.four | 103.sixty | 17./15. | 1400./318180 |
Organization orientation Business orientation
Good quality orientation: Previously mentioned the average, largely exported to United states of america, Europe, Asia etc.
Strictly according: ISO/ANSI/DIN common.
Price tag orientation: Price-overall performance ratio is extremely large.
Why select us? 1. We are manufacturer.
2. We received the certification of TUV GERMANY in 2016.
three. We have 21 years background in chain, Low cost Factory Cost gearbox pace variator foot mounted in-line helical reducer sprocket, coupling subject, and just concentrate on it, do about 8 many years of export investing.
four. Its the scientific and technological small and medium enterprises of ZHangZhoug province.
five. Sturdy technologies group and innovative gear. (our supervisor was technological chief of chain basic manufacturing unit, at begin, there are only 2 factories in China ahead of).
6. Quick shipping time, equipment is innovative.
seven. Cost is just earlier mentioned the average in China, top quality is strictly according to ISO/ANSI/DIN common, so price-performance ratio is really large. Largely exported to center-large marketplace.
eight. Targeted traffic is quite simple, about 5 minutes travel length from railway station and the exit of freeway.
nine. We’ve received USD fifty five, ASA forty Common roller chain sprocket plate wheel 000 trade assurance from Alibaba.com, is the initial batch of its users.
10. You could place trade assurance order to us by Alibaba, to assure the supply time and good quality.
11. We accept T/T, D/P, D/A, O/A, L/C payment terms, for little purchase, paypal, western union are the two okay.
twelve. OEM/ODM are each accessible.
thirteen. Marking your manufacturer or other character on chain is workable, UDL collection planetary gear speed increaser worm gearbox velocity variator with motor variator transmission want your authorization of model utilizing.
Firm Information
Introduction of firm
Business Kind: Manufacture
Location: HangZhou, China mainland
Year Established: 1995
Business Certification: ISO 9001
Primary Merchandise: Leaf Chain, Auto Chain, Silent Chain, Driving Chain, Conveyor Chain, Particular Chain…
Right after income provider
1. We will be happy to provide you 24 hrs services a working day.
2. 1 year top quality assure period of time underneath common setting for use, and faulty item free of cost in 1 12 months.
3. Any response from our consumers will be hugely appreciated.
Certification
Our ServicesFollowing sales provider
1. We will be glad to source you 24 hrs support a working day.
2. 1 yr good quality ensure interval underneath typical environment for use, and faulty product totally free of cost in 1 year.
3. Any response from our buyers will be highly appreciated.
Packaging & Delivery
A lot more Items
Choosing the Right Chain Sprocket For Your Bike
When deciding which chain sprocket to buy, you should be aware of how they fit on the bike. These sprockets are often secured to the bike’s shaft by either one or more set screws. ANSI standards for sprocket keyways provide the proper dimensions for a given shaft diameter. However, they aren’t universal and might not apply to all applications. As a result, it is important to consult a supplier who is familiar with the exact keyway dimensions.
Roller chain sprocket
A Roller chain sprocket is a gear with toothed rollers. The tooth profile determines the arc length of the roller. A roller with an undercut tooth profile will not transmit movement properly. For this reason, the pitch line of the roller should be equal to the incremental circle length (r) divided by the number of teeth.
The chain sprocket is available in various types. They can be used in conveyor chains. They are usually available as ready-to-mount units. Finished bores and wide hubs are available for mounting them. They are also available with a roller-bearing design.
The teeth of sprocket wheels are derived from the involute-trochoid curve. In order to engage with these teeth, the roller chain must be sufficiently accurate to avoid backlash. However, conventional roller chains can also engage with these teeth. However, this cannot eliminate backlash completely. This is why the invention provides means for reducing the friction between the teeth and the roller. This also increases the life span of the roller-and-sprocket transmission.
In terms of standards, the ANSI standard is widely used in the industry. It accounts for nearly 15% of the market in Europe and holds an advantage over the ISO standards. In North America, manufacturers of sprockets follow the ANSI code B 29.1. The ANSI code provides clear design guidelines and allows for interchangeability among different types.
There are many considerations to make when selecting a sprocket. A key factor is the transmission input. For example, if the transmission has a high horsepower, the center distance between the large and small sprockets is smaller. To compensate for this, a chain with a smaller pitch may be appropriate. Also, if the transmission has a high horsepower ratio, a multiple-strand drive is a viable option.
If you’re looking for a quality roller chain sprocket, you should check out MDS. They stock a wide range of types and sizes for a variety of industrial machinery.
Gap-tooth sprocket
A gap-tooth chain sprocket has tooth-head heights greater than the ISO tooth form height. This ensures that the pins and rollers meet at a point near the tooth head, and eliminates pulsating movement and intermittent changes in speed.
The front and rear surfaces of the sprocket are convex arcs, with radii equal to each other and the center of the tooth gap bottom. This allows for a uniform pitch and reduced friction. The tooth-face height of a gap-tooth chain sprocket is equal to the pitch of the chain, while the radii of its tooth-faces are larger than that of an ISO tooth-form.
One form of gap-tooth chain sprocket has four teeth at regular intervals. The teeth are interconnected by arc-shaped tooth gap bottoms. The resulting chain pitch is called the chain pitch. The gap-tooth sprocket can be used on various types of wheels.
ISO 606 1994 (E) defines the standard chain length, while Japanese Industrial Standards (JIS B 1801) define the standard tooth form. The ISO and Japanese Industrial Standards define two different tooth forms, namely S-tooth and U-tooth. The ISO and Japanese Industrial Standard tooth forms have different tooth pitches, but the root diameter of both forms is the same. The distance between each tooth is measured from the pitch polygon.
The tooth gap bottom circle of the gap-tooth sprocket gradually contacts the surface of the front tooth in the opposite side of the tooth gap. As this process continues, the tooth surface of the gap-tooth sprocket moves closer to the tooth head. This reduces the impact, which results in less noise.
The gap-tooth chain sprocket is an ideal solution for many applications. It allows the chain to disengage easily. With the same frequency, the teeth of the sprocket also help in regulating vibration. A sprocket with short teeth will be easier to disengage when necessary.
Another popular style of gap-tooth chain sprocket is the random polygon 64. The random polygon is a quadrilateral. Each vertex of the quadrilateral is assigned to one of the four consecutive pins on the uniform chain. The four consecutive pins are aligned in a gap-tooth pattern.
Steel split sprocket
Split sprockets are perfect for large portions of the drive system, as they can be installed without disassembling the entire shaft assembly. These sprockets are also useful in applications where there is limited workspace. They can be installed without disassembling the entire shaft assembly, minimizing the risk of damage to the conveyor system and reducing downtime.
There are several different types of split sprockets, including mat chains and table chains. Each type differs in bore diameter, number of teeth, block body style, and abrasion resistance. Some are made from steel, while others are made from a non-split material.
Split sprockets are available from many manufacturers. Typically, the split sprockets are made with two pieces of steel, which are then joined together again. This assembly technique is a cost-effective way to mount sprockets on a shaft. These sprockets can be stocked in multiple sizes and keyways.
Stainless Steel sprockets are available in stock and custom configurations. They are designed to last for years to come. These sprockets are suitable for conveyors, power transmission systems, and robotics. In addition, these sprockets offer heightened quality and durability. Some of these sprockets feature a bevel or spiral bevel gear, while others are made from helical gear.
Split sprockets are available in a variety of sizes. For instance, the RCS-03 is a plain bore type, while the RCS-04 is a finished bore type. Split sprockets are available with a split taper bushed design. They are also available with either single or multiple strands.
Double-duty sprocket
If you are looking for a heavy-duty chain sprocket, you have many choices. They come in different sizes, shapes, and materials. Some have wide teeth while others have narrow teeth. You should choose a sprocket that has the correct tooth pitch for your chain’s pitch diameter. You should also pay attention to the sprocket’s bore, or the hole in its center through which the drive shaft passes.
The type of transmission will also determine the type of sprocket you need. High-power transmissions, for example, require higher-pitch sprockets than lower-pitch models. To make sure that you choose the right sprocket for your application, check the horsepower and pitch of your transmission. If you have a low-pitch transmission, choose a smaller chain pitch. High-horsepower transmissions may also require multiple-strand drive.
There are different standards for sprockets, but ANSI standards are widely accepted. For instance, ANSI code B 29.1 requires sprockets to have two teeth per chain pitch, whereas ISO standards call for three. The double-duty sprocket, on the other hand, engages every other tooth. This helps the sprocket’s lifespan.
There are many different sprockets, and each has different performance characteristics. Generally, sprockets are made of metal or reinforced plastic and are similar to bicycle gears in their wheel-shaped design. Different types of chain sprockets have different teeth and work with different types of chains. The design of the chain and sprocket also determines the type of sprocket needed.
One popular type of double-duty sprocket is the steel-split sprocket. Its pitch is half the pitch of the chain and is usually referred to as a ‘double-duty’ sprocket. It is often used for heavy-duty purposes, as it distributes the load evenly on the chain.
While sprockets come in different tooth pitches and diameters, the recommended number of teeth is 17. The more teeth on the sprocket, the longer it will last. The height of the teeth is also important. A sprocket with more teeth will increase the life of the chain.
editor by czh 2023-02-15