Mô tả
Công ty TNHH Bánh răng Ever-Power Hàng Châu
We do not ask you to trust us. We give you the documentation to verify it yourself.
The Documentation Package That Ships with Every #60 SS Sprocket
Buyers who source industrial components from overseas suppliers often face one of two trust problems: either the supplier’s quality claims are unverifiable, or the documentation requested arrives incomplete, months late, or formatted in a way that does not pass procurement review. The Nhông xích thép không gỉ Ever-Power #60 is specified for applications where neither problem is acceptable — fish processing lines, chemical plant conveyors, and offshore equipment where a component failure means a shutdown or, in the worst case, a safety incident. Our response to that requirement is a standard documentation package that ships with every order, unrequested:
Chemical composition and mechanical properties confirmed against the declared grade. Heat number cross-referenced to the finished sprocket serial number.
Pitch diameter, bore diameter, and keyway dimensions measured and recorded on coordinate-measuring machine. 100% inspection, not sampling.
Our full quality management system is third-party certified. Certificate copy included with each order package for your procurement records.
SGS, Bureau Veritas, or Intertek pre-shipment inspection coordinated on request. Buyer’s cost; our full cooperation and factory access provided.
Thông số kỹ thuật
| Tham số | Giá trị |
|---|---|
| Số chuỗi | ANSI 60 |
| Sân bóng đá | 19,05 mm (3/4″) |
| Vật liệu | Thép không gỉ 304 / Thép không gỉ 316 |
| Phạm vi răng | 8T – 72T |
| Optional IH | Tooth face HRC 42–48, core annealed |
| Sự tuân thủ | ANSI B29.1 Loại A, ISO 9001:2015 |
What the Certification Means on the Shop Floor
ISO 9001:2015 certification means that our quality processes are not informal — they are documented, audited by an independent body, and continuously maintained. In practice, it means that when we state a bore tolerance of H7, there is a controlled measurement procedure, a calibrated gauge, an inspection record, and a non-conformance management process behind that statement. When we state 316 SS material, there is a PMI procedure, a supplier qualification record, and a traceability requirement behind it. The MTR we send is not a generic print — it references the specific heat number of the bar used to make your order. For engineers buying critical components from an overseas supplier for the first time, that degree of documentation transparency is often the factor that makes an approval possible where it otherwise would not have been.
Parts & Components We Supply
Của chúng tôi đĩa xích thép không gỉ quality system covers the entire drive assembly we supply. Matched components, same documentation standard:
- Xích con lăn ANSI 60 SS — 304 and 316 grades, MTR-documented on request
- Xích SS dòng nặng 60H — for drives subject to shock or sustained heavy load
- Ống lót côn QD đường kính lớn — for rapid planned changeout
- Vòng đệm trục SS — precise axial positioning, grade-matched
- Tấm chắn ổ đĩa SS tùy chỉnh — 1.5 mm 304 sheet metal with hinged inspection panel
Đánh giá của khách hàng
“The MTR and CMM report were in the shipment, correctly formatted, with the heat number on both documents matching. Our QC team approved in one hour. Sprockets installed without modification. Outstanding.”
“We requested SGS pre-shipment inspection on our first order. Ever-Power arranged it promptly and the inspection passed first time. That gave our engineering director the confidence to approve ongoing procurement.”
“Documentation was better than from our previous EU supplier. Induction-hardened version performed well on our aggregate drive — 14 months in, no tooth wear detectable by our gauges.”
Request Your First Order with Full Documentation
+86-571-88220653 | [email protected] | Đường Shenhua, Hàng Châu, Trung Quốc
Xem toàn bộ stainless sprocket range hoặc ghé thăm trang web của chúng tôi. Trang Giới thiệu.
Đánh giá
Chưa có đánh giá nào.