توضیحات
شرکت چرخ‌دنده‌های هانگژو اور-پاور (Hangzhou Ever-Power Sprocket Co., Ltd.)
If a European machine runs DIN 8187 chain and you install an ANSI sprocket — it will fit on the shaft but the chain will not run correctly. Understanding this distinction is what this page is built around.
The Specification Error That Looks Right Until the Machine Runs
A purchasing manager ordering a replacement #40-equivalent stainless steel sprocket for a European-manufactured food conveyor might reasonably specify “12.7 mm pitch stainless sprocket” — and receive an ANSI 40 unit that fits the shaft bore, looks dimensionally correct sitting on the desk, and mounts without obstruction. The problem appears within the first operating hour: the smaller 8.51 mm roller of the DIN 8187 (08B) chain does not seat correctly in the 7.92 mm-roller-profile tooth form of the ANSI 40 sprocket. The chain rides high on the tooth tips, generates noise, and wears at a rate several times higher than normal. Within weeks, both sprocket and chain may require replacement. The چرخ‌دنده فولادی ضد زنگ استاندارد اروپایی Ever-Power is machined specifically to DIN 8187 / ISO 606 tooth geometry — verified against DIN 8187 chain gauge sets, not just drawings — ensuring correct seating and full-life performance on European-standard chain drives.
DIN 8187 vs. ANSI B29.1 — The Dimensional Differences That Matter
Both standards use the same pitch values but differ in roller diameter and inner width — the two dimensions that directly determine tooth form geometry. At every common pitch, the DIN roller is larger than the ANSI roller, requiring a different seating radius in the sprocket tooth pocket. This is why ANSI and DIN sprockets are not interchangeable even when pitch matches.
| BS/DIN Chain | گام (میلی‌متر) | DIN Roller Dia. | ANSI Equiv. | ANSI Roller Dia. |
|---|---|---|---|---|
| 06ب | 9.525 | 6.35 mm | استاندارد ملی آمریکا (ANSI) 35 | 5.08 mm ❌ |
| 08ب | 12.7 | 8.51 mm | استاندارد ملی آمریکا (ANSI) 40 | 7.92 mm ❌ |
| 10ب | 15.875 | ۱۰.۱۶ میلی‌متر | استاندارد ملی آمریکا (ANSI) 50 | 10.16 mm ✓ |
| ۱۲ب | 19.05 | 12.07 mm | استاندارد ملی آمریکا (ANSI) 60 | 11.91 mm ≈ |
| ۱۶ب | 25.4 | ۱۵.۸۸ میلی‌متر | استاندارد ملی آمریکا (ANSI) 80 | 15.88 mm ✓ |
❌ = Non-interchangeable; tooth profile geometry differs significantly. ✓ = Roller diameter coincidentally matches; inner width still differs — verify before assuming interchangeability.
مشخصات فنی
| پارامتر | ارزش |
|---|---|
| استاندارد | DIN 8187 / ISO 606 / BS |
| محدوده گام | ۹.۵۲۵ میلی‌متر – ۳۱.۷۵ میلی‌متر (۰۶B – ۲۰B) |
| مواد | 304 اس اس / 316 اس اس |
| Tooth Verification | DIN 8187 chain gauge sets (not just drawings) |
| Bore Options | Metric finished bore (H7) + DIN 6885 keyway |
| انطباق | DIN 8187 / ISO 606, ISO 9001:2015, EN 10204 3.1 |
What European OEMs and Procurement Teams Require — and What We Deliver
قطعات همراه استاندارد DIN
Building a complete DIN-standard چرخ دنده فولادی ضد زنگ drive requires European-standard chain — not ANSI chain — and matching hardware:
- زنجیر غلتکی DIN 8187 / ISO 606 SS — 304 and 316 grades, 06B through 20B
- European-Standard SS Connecting Links - انواع پرسی و فنری
- چرخ دنده های هرزگرد DIN 8187 SS — for tensioning on European-pitch drives
- مجموعه بوشینگ‌های مخروطی-قفل متریک — نسخه‌های با قطر داخلی متریک برای شفت‌های اروپایی
- کلیدهای شفت DIN 6885 — فولاد ضد زنگ A2-70، تمام اندازه‌های کلید متریک
برای چرخ‌دنده‌های استاندارد DIN SS با ما همکاری کنید
جاده شنهوا، هانگژو، چین | +86-571-88220653 | [email protected]
فهرست کامل ما را مرور کنید محدوده چرخ دنده فولادی ضد زنگ or learn about our facility on the صفحه درباره ما.
بازخورد مشتری
“We source 12B SS sprockets for our Netherlands dairy line. DIN compliance confirmed, EN 10204 3.1 certs included. Ever-Power is now our preferred supplier over Renold for stainless variants — better price and faster delivery.”
“08B 316 SS with electropolish for a GMP tablet coating line — delivered correctly specified, passed incoming QC without remedial work. Clean metric bore, correct key. Will order again.”
“10B SS sprockets for a Swedish water treatment clarifier — 316 grade, 12-month service, no corrosion. Non-stock tooth count added some lead time but quality was excellent.”
نقد و بررسی‌ها
هنوز بررسی‌ای ثبت نشده است.