விளக்கம்
ஹாங்சோ எவர்-பவர் ஸ்ப்ராக்கெட் கோ., லிமிடெட்.
ANSI 60 stainless steel sprockets — heavy-pitch drives engineered for high load, high corrosion resistance, and long service life.
தயாரிப்பு கண்ணோட்டம்
தி #60 Stainless Steel Sprocket from Hangzhou Ever-Power handles ANSI 60 roller chain with a 19.05 mm (3/4″) pitch — the first of the genuinely heavy-duty ANSI chain family. At this pitch, sprockets carry substantially higher tensile and shock loads than the lighter #40 and #50 sizes, making them the standard choice for heavy conveying, log-handling equipment, forestry machinery, heavy industrial washing systems, and chemical plant transfer equipment. Our #60 SS sprockets are hobbed from 304 or 316 stainless steel billet on rigid gear-hobbing machines with anti-vibration fixturing to ensure tooth-to-tooth pitch accuracy within ±0.025 mm — a precision level that directly translates to quieter chain engagement and longer chain life in service.
தொழில்நுட்ப விவரக்குறிப்புகள்
| அளவுரு | மதிப்பு |
|---|---|
| சங்கிலி எண். | ANSI 60 |
| செயின் பிட்ச் | 19.05 மிமீ (3/4″) |
| ரோலர் விட்டம் | 11.91 மிமீ |
| உள் அகலம் | 12.57 mm |
| பொருள் | 304 எஸ்எஸ் / 316 எஸ்எஸ் |
| பல் வரம்பு | 8T – 72T |
| கிரிக்கெட் | ANSI B29.1 வகுப்பு A, ISO 9001:2015 |
Performance in Heavy-Duty Environments
The jump from #50 to #60 pitch represents roughly a 40% increase in allowable chain tension, enabling much higher power transmission through a single strand. For stainless steel applications, this matters most in heavy-duty washdown environments such as fish-processing factory floors and underground mining conveyors where chemical and moisture exposure is relentless and the mechanical loads are high simultaneously. Our 316 SS grade handles both demands without a supplemental coating — the material itself is the protection. Where tooth face hardness is a concern at high loads, we offer selective induction hardening of the tooth faces only, preserving the corrosion resistance of the base material while adding surface hardness of HRC 40–45 at the contact zone.
Induction Hardening — When to Specify It
Induction hardening is worth specifying in any application where the sprocket drives a heavily loaded chain at moderate to high speeds, particularly with shock or reversing loads. The hardened tooth face (HRC 40–45) resists brinelling from roller impact, while the softer SS core remains ductile to absorb shock without tooth fracture. Food-safe processes may opt for electropolished-only finish to maximise cleanability rather than hardness — the trade-off depends on whether tooth wear or hygiene compliance is the primary design driver.
Typical Applications
| விண்ணப்பம் | Environment | SS Grade |
|---|---|---|
| மீன் மற்றும் கடல் உணவு பதப்படுத்துதல் | Saltwater, brine, acids | 316 எஸ்.எஸ். |
| Lumber / Timber Handling | Outdoor, moisture, chemicals | 304 or 316 SS |
| இரசாயன ஆலை பரிமாற்றம் | Alkalis, solvents, acids | 316 எஸ்.எஸ். |
| Mining Conveyor | Underground humid/acid | 316 SS + induction hardened |
Companion Parts Available
- ANSI 60 SS ரோலர் சங்கிலி — 304 and 316 grades, per-link or bulk supply
- 60H ஹெவி சீரிஸ் SS செயின் — for drives at the upper end of #60 power ratings
- Large-Bore Taper Bushings — SDS and QD bushings for #60 hub-mounted sprockets
- SS ஷாஃப்ட் காலர்கள் — for precise axial location of the sprocket on the shaft
- Custom Fabricated Drive Guards — 1.5 mm 304 SS sheet-metal guards to cover the drive
வாடிக்கையாளர்கள் என்ன சொல்கிறார்கள்
“We run #60 SS sprockets on our salmon processing conveyor in a heavily chlorinated washdown zone. Twelve months later: no corrosion, no pitting. These replaced Tsubaki carbon steel units that rusted out in 3 months.”
“Induction-hardened #60 sprockets for our aggregate conveyor — outstanding wear resistance. The bore H7 tolerance is tight, and the keyway was clean. Very pleased with this supplier.”
“Solid #60 SS sprockets, well-packaged for sea freight. The product quality is good. Communication was prompt when we had a query about custom hub length — helpful team.”
Order #60 SS Sprockets — Custom & Standard
+86-571-88220653 | [email protected]
Discover our complete sprocket catalogue or read more on our எங்களைப் பற்றி பக்கம்.
விமர்சனங்கள்
இன்னும் மதிப்புரைகள் இல்லை.